Carbide tip wear is one of the major challenges that most stump grinder operators are struggling with. It becomes very expensive for the operator to keep replacing the teeth now and then. However, you can quickly fix the problem and see yourself enjoy your Sandvik stump grinder teeth for an extended period. For instance, do you mind the kind of conditions that you expose toy stump grinder to? Well, these are the kind of questions that you need to ask yourself. In this article, we are providing you with tips that will help you extend the use of your Sandvik stump grinder teeth’s carbide tip by reducing the rate of wear.
Check the Type of Teeth
The type of teeth that you are using is an important fact to consider. However, most of the stump grinders do not consider this factor. For instance, most people do not mind the kind of teeth that they use to replace the original OEM as long the machine resumes work. However, the infiltration of low-quality products, which sells at a lower price, makes a kill out of such ignorant operators. So they buy low-quality products that end up wearing out at a very high rate of wear and tear. Therefore, make sure that you have chosen the best quality teeth even if it is not the OEM replacement.
The Conditions
What kind of conditions are you working on? This is one of the key factors that you need to think about before you start with your grinding work. One thing that you must always think about is whether the king of teeth that you are using could be used in such condition. What kind stumps are you grinding? Are they hardwood or softwood stumps? Are the teeth suited for such types of stumps? These are critical questions that can help you determine the kind of condition that you are working in. If the teeth cannot work for the hardwood, then you should avoid working on hardwood as this would greatly accelerate the rate of Sandvik stump grinder teeth’s carbide tip wear.
The Type of Carbide Used
When a carbide tip is mentioned, it does not mean that you have the best Sandvik stump grinder teeth. The type of carbide used matters a lot and some rare cases, you might find poor carbide material used for the tip. What you need to check is the amount of the cobalt added to the carbide grains. However, getting the best type of tungsten carbide could ensure that you have gotten the bets type carbide tip.
At JYF Machinery, we are reputable aftermarket manufacturers of wear parts fitting stump grinder. Our aim is to provide our customers with high quality and reliable wear parts fitting their machines. We produce a vast range of tools including stump grinder teeth, pocket, holder and many others.
We use the latest manufacturing technologies, including hot forging, cold forging, CNC machining center, hard alloy brazing and hard alloy particle surfacing to ensure top quality tools. Contact us today for all your stump grinder wear parts. With us, quality at an affordable cost is a guarantee. If you need customized wear parts, we can help.
