Hot Search:Fecon Mulcher,Fae Mucher,Tub Grinder

Welding Bars And Weld On Teeth

» Rotary Drilling Tools » Welding Bars And Weld On Teeth

Welding Bars And Weld On Teeth

RUIAN JYF MACHINERY MANUFACTURING CO. LTD Manufacturing and supplying welding bars and weld on teeth for pengo attachments, pengo auger teeth, pengo auger parts, post hole digger teeth, post hole digger parts, mcmillen auger parts, mcmillen auger teeth, bobcat auger parts, lowe auger bits, pengo auger bits, jiffy auger parts, feterl auger parts, bobcat auger bits, skid steer auger bits, danuser auger bits and OEM parts fitting to Drilling Bucket, Rock Auger, Core Barrel, Continuous Flight Auger (CFA), Casing Twister, Casing Shoes, Pipe Shoes, Core Ring and Belling Tools etc.

 

Material:

 

Tungsten carbide: The grounded raw material is prepared for maximum abradability by using double-grain structure tungsten carbide, which is substantially stronger than traditional coarse-grained cemented carbide. The double-grain structure carbide has a maximum hardness as high as 90-93 HRA, and a maximum impact toughness of more than 2800 MPA. This represents a performance improvement of between 25%-33%—which means our customers pay less for accessories for our drilling equipment due to the significantly longer running times of our machines.

 

Braze welding: A welding technique introduced from Northern Europe that allows the interpenetration of alloy and alloy composition in the steel body (thereby achieving high welding strength).

 

Hard facing: the adoption of the specially made Cr-W blended wear-resistant welded layer with maximum hardness up to 55-60 HRC. Possesses outstanding abrasion and impact resistance performance.

 

Steel body:

 

The steel body is forged with a special wear-resistant alloy steel, which has exceptional strength and toughness, a higher fatigue limit, the ability to withstand impact after quenching and tempering, and maximum hardness of 53-54 HRC. These characteristics protect the drilling tools and strengthen the protection of the tungsten carbide to extend the life cycle of our drilling equipment and their wear parts.

 

Applied attachment: Drilling Buckets, Rock Augers, Core Barrels, Continuous Flight Augers (CFAs), Casing Twisters, Casing Shoes, Pipe Shoe, Core Rings, Belling Tools

 

Applied model: BAUER, MGF, LIEBHERR, TMT, NCB, CASAGRAND, CMV, SOILMEC, MAIT SANYI, XCMG, ZOOMLION

BAUER: BG18, BG25, BG28, BG30, BG34, BG36, BG40, BG46

SANYI: SR150, SR200C, SR220C, SR250, SR260, SR280, SR360, SR460

XCMG: XR460, XR400, XR360, XR280, XR260, XR 220, XR 180, XR 150, XR120D

SOILMEC: SR40, SR60, SR80, SR95, SR105

IMT: AF8, AF200, AF220, AF280, AF300

ZOOMLION: ZR280, ZR360, ZR220, ZR180, ZR150

Sunward: SWDM15H, SWDM20, SWDM25, SWDM28, SWDM36

 

The types of our company's Foundation Drilling Tools, Holder & Block including:

 

BAUER

Foundation Drilling tools: WS Teeth:WS20,WS39,WS39R,WS39-T,WS46,WS52,Holder WS20, Holder WS39/46/52,Pin WS20,Pin WS39

 

Flat Teeth:

FZ54,FZH54,FZ72,FZH72,FZ80,FZH80,FZ72L,FZ72LH,FZ64,TL18,TL18 Holder

C401,C402,C403,C404,C405,C406,RM47,RM30,H85/1,H85/2,H85/3,H47,H30-1,BC30,BC40,BC50

SB36, SB38ZM, SB42ZR, SB42ZL, SB38JM, SB42JR, SB42JL, SB38JMK, BFZSB38JMK/LC, BFZSB42JR/LC,

BFZSB42JL/LC, BFZSB38, BFZSB25/M Plus, BFZSB25/R Plus, BFZSB25/L Plus, BFZSB38JMK DC, BFZSB38 HR DC

 

Betek

Foundation Drilling tools:BKH28 B47K17.5-H,BKH40 B47K19-H,BKH47 B47K22-H,BHR38 Holder B43H,BHR96 Holder B85,BZ12 ,BM46 BM 3-11.3.,BHR03 Holder B11,BM55 BM4-14/2, BTR03B 43/3,BTR02 B43HD,BHR20 Holder DV8,BSH05 B1HDK12,BSK17 B1HDK12K,BSH09 B3,BSK12 B3K,BHR07 Holder DV9,BTK03 B40HDK12,BTK16 B40/3,BTK10 B40HDS,BHR31 Holder DV25,BHR32 Holder DV25VS

 

Flat Teeth/Weld-on Teeth/Weld-on Casing Crown:BFZ70 BFZ100x70/1,BHR39 Holder B48,BFZ65HM BFZ65/2,BHF02 Holder B65-22,BFZ80 BFZ80,BHR73 Holder BHZ 80.2,BFZ25R BFZ25-R,BFZ51 BFZ51,BFZ96 BFZ71x25,BVR05 0880/250,BFZ213 BFZ87x37x121

 

Welding Bars: BA10 BA50-26.5, BA13 BA55-22, BA32 BA60-32/2, BA04 BA70-38, BA24 BA90-42, BFZ26 BFZ83x75x24/1, BA07 BA80-33/2, BHA02 Holder BHA 60/2, BA38 BA100x52

 

RUIAN JYF MACHINERY MANUFACTURING CO. LTD is one of the most established companies in China which specializes in manufacturing and supplying Welding bars and weld on teeth, including rock auger bit, bauer drilling tools, DT87 Weld on teeth, ba09 welding bars for pengo attachments, pengo auger teeth, pengo auger parts, post hole digger teeth, post hole digger parts, mcmillen auger parts, mcmillen auger teeth, bobcat auger parts, lowe auger bits, pengo auger bits, jiffy auger parts, feterl auger parts, bobcat auger bits, skid steer auger bits, danuser auger bits. We use only the best quality cemented-carbide for exceptional cutting performance, and superior resistance and hardness to meet your needs. You will encounter less downtime and see increased productivity with our quality products.

 

We have our own rotary drilling tools factory, and customers are welcome to buy our rotary drilling tools at wholesale. Our parts are relatively inexpensive, but of the utmost quality. Our main products include: flat teeth, bullet teeth, welding bars, weld on teeth, Wall cutter and casing teeth for pengo attachments, pengo auger teeth, pengo auger parts, post hole digger teeth, post hole digger parts, mcmillen auger parts, mcmillen auger teeth, bobcat auger parts, lowe auger bits, pengo auger bits, jiffy auger parts, feterl auger parts, bobcat auger bits, skid steer auger bits, danuser auger bits