086-577-86255958

sales@jyfmachinery.com

Economic Development Zone

Wencheng,Wenzhou, China.

STUMP GRINDER CUTTER TEETH AND POCKET

produce stump grinder teeth, stump cutter and pockets for greenteeth, bandit, morbark, bluebird, rayco, carlton, vermeer, including yellow jacket series, dosko and sandvik stump grinder

Top Categories

over 20 years’ experience and professional knowledge, technologically changes our technique, we are dedicated to provides the best Cutting and wear resistance solutions to our valued customers.

  • +86 136 0577 9141

    Mon-Fri, 9am until 6pm

  • sales@jyfmachiery.com

    We reply within 24 hours

  • Wencheng Economic Development Zone

    Wenzhou, China.

What is A Stump Grinder?

A stump grinder is a piece of heavy equipment with a spinning carbide-tipped steel wheel on the front. We lower the wheel onto the edge of the stump and move it from side to side as it spins. Then the grinding deeper into the stump with each movement. Eventually, the whole tree stump will be ground up into small wood chips, and this includes the main roots below the stump.

Cutter Teeth for Stump Grinder

How to Choose the Right Stump Grinder Tooth Series

Stump grinder teeth are the carbide-tipped cutting tools mounted on the cutter wheel that do the actual grinding work. Over time, teeth wear down from contact with wood fiber, soil, and rocks, reducing cutting efficiency and increasing fuel consumption. Signs that your stump grinder teeth need replacement include slower grinding speed, excessive vibration, uneven cuts, and visible carbide tip wear or breakage. Replacing worn teeth promptly not only restores cutting performance but also protects the pockets and cutter wheel from accelerated damage.
Sandvik Stump Grinder Teeth Carbide Tip

Stump grinder teeth refer to the cutting tools attached to the rotating cutting wheel or drum of a stump grinder. These teeth are responsible for grinding and removing tree stumps. They come in various shapes and materials such as carbide, steel, or diamond, depending on the intended application and the type of stump being removed.

Our stump grinder teeth feature premium carbide tips brazed onto high-strength 42CrMo alloy steel shanks, heat-treated to 42-55 HRC for superior wear resistance and impact toughness. Each tooth undergoes precision machining to ensure exact dimensional accuracy and a secure fit in standard pocket systems. Whether you need replacement teeth for Greenteeth 500, 700, 900, or 1100 series pockets, our carbide-tipped cutting teeth deliver extended service life and consistent cutting performance across hardwood, softwood, and root-dense soil conditions.

Precision Carbide-Tipped Stump Grinder Teeth

Choosing the right stump grinder tooth series depends on your machine’s horsepower rating and wheel diameter. The 500 series is designed for compact grinders under 20 hp, while the 700 series fits mid-range machines from 20 to 45 hp. For professional-grade grinders rated between 40 and 85 hp, the 900 series provides the optimal balance of cutting aggressiveness and durability. High-production machines above 85 hp require the heavy-duty 1100 series teeth for maximum material removal. Each series uses a matched pocket system with specific bolt patterns, so always verify your machine model before ordering replacement teeth.

Stump Grinder Pockets

Stump grinder pockets, also referred to as tooth pockets or cutter pockets, are the receptacles or cavities built into the stump cutter wheel or drum where the stump grinder teeth are installed. These pockets securely hold the teeth in place and allow for easy replacement or repositioning when necessary. They are designed to withstand the impact and forces generated during stump grinding operations.

Stump Cutter

Stump cutters, also known as stump cutter wheels or cutting wheels, are the main components that house and hold the stump grinding teeth. They are typically made of heavy-duty steel and are attached to the stump grinder’s drive system. The stump cutters provide the rotational force and housing for the teeth to effectively grind and remove stumps.

JYF Machinery manufactures and sells cutting tools, and a range wear parts. We produce cutting tools and wear parts for stump grinder equipment of the following brands:

GREENTEETH, BANDIT, MORBARK, BLUEBIRD, RAYCO, CARLTON, VERMEER (INCLUDING YELLOW JACKET SERIES), DOSKO, SANDVIK

Our cutting tools and wear parts are for grinders, including stump grinder teeth, and stump cutter. We also produce for stump finger teeth, stump round teeth, pockets, holders, cutting wheel, bolts, and more. We’re committed to helping our customers make the most out of their stump grinders. To achieve this, we have designed different shapes of stump grinder teeth that enhance your equipment performance by increasing its grinding speed and efficiency.

On this website, only part of our selected stump grinder teeth and cutter products are displayed. If you can’t find the product you want on our website or need customized stump crusher accessories, please contact us.

Scroll to Top